ah yes that be Vapochill system Morphium, extremely silent if its watercooled.
Vapochill Complete Extreme Edition - AMD (Socket A) Titanium (FS-019-VP)
The VapoChill Xtreme Edition offers an amazing 180 Watts of cooling at sub-zero temperatures for the hardcore and extreme overclocker!!!
Unlike the rest of the VapoChill family the Xtreme Edition is based on another coolant; R404a, which is more powerful and effective in removing the heat from your CPU. The result - lower CPU core temperatures at maximum overclocks.
- Titanium design case with grey display window and side panel clear acrylic window
- VapoChill Cooling unit removing up to 180 W
- High-tech software-based ChillControl (Electronic control unit)
- CPU-kit supporting AMD Socket A CPUs
Important Information - VapoChill systems are for advanced users only. Do not buy this system unless you agree with the following conditions and the technical support/returns procedure.
Power Supply - In order for the cooling system to work properly, the power supply used should meet the below minimum requirements. The peak current is only required during the compressors start-up procedure. In order for the compressor to work continuously, the PSU must under no circumstances go below 9.6 V - even for only a very short time. Your PSU must meet the these power requirements. Start-up - Cut-in voltage 10.9 V, Peak current @ 12 (50 ms): 12 A +/- 1 A, Peak current @ 10 (50 ms): 14 A +/- 1 A. Continuous - Cut-out voltage: 9.6 V, Current @ 12 V and 100 W heat load: 6.6 A.
CPU & Motherboard Used in VapoChill - As the CPU and motherboard will be operating outside the specification intended by the respective manufacturers
Still pretty cool stuff.
