Yes...it works....XP is just essentially NT...so all you do is install as if for NT/2000....
Configuring Windows NT for LiteStep
-----------------------------------
The most common problem that happens during a LiteStep install on a
Windows NT machine is that most of the time users don't have administrative
privileges on their machine and can't use a shell swapper.
There is, however, a way to get around this.
You will need to modify a few registry entries, don't be afraid, so fire up regedit
and lets get started :
- HKey_Local_Machine\Software\Windows NT\CurrentVersion\IniFileMapping\
system.ini\boot>SYS:Software\Microsoft\Windows NT\CurrentVersion\Winlogon
change this to USR:Software\Microsoft\Windows NT\CurrentVersion\Winlogon
- HKey_Current_User\Software\Microsoft\Windows NT\CurrentVersion\
Winlogon>Shell
change the value of Shell to c:\litestep\litestep.exe to add LiteStep.
- HKey_Current_User\Software\Microsoft\Windows\CurrentVersion\Explorer\
Advanced>SeperateProcess
if this DWORD is set to "1" explorer won't load as the shell when triggered
inside another shell, if this key is set to "0" it will.
This key effects LiteStep if you are using Internet Explorer 4 and up, if you have
an earlier version of Internet Explorer, use a STRING named DesktopProcess,
with a value of "1" instead of the DWORD. Basically you need this set to yes if
you don't want to have explorer setting itself as shell everytime you access it.
Note: You can make LiteStep restart automatically after a crash in Window NT.
This was taken from the LiteStep b24 Manual written by TheMAN.
"The command SetAsShell makes LiteStep behave as the Official shell and it
notifies Windows of this fact. This does seem to create some problems with
with Windows at times (especially with IE and quite often when running NT)
and it has been found that if you do use StepAsShell in your Step.Rc, you might
have to set the
HKEY_LOCAL_USER\Software\Microsoft\Windows\Current Version\Explorer\DesktopProcess
key's value in your registry to 1 to get IE (and Windows) to work properly.
The only advantage to using SetAsShell is that LiteStep is automatically started
when it crashes, like Explorer normally does. As setting LiteStep as the shell
seems to create strange problems on different machines, it is suggested that
you don't set this value in your Step.Rc. If you do use SetAsShell and decide to
take it out after a while, remember that you will have to reboot (not Recycle
as is the normal case with a Step.Rc change) and that you may have to set the
HKEY_LOCAL_USER\Software\Microsoft\Windows\Current Version\Explorer\DesktopProcess
registry value back to 0 to get everything working properly."
So basically, if you want to try this - take a risk, worst thing that can happen is
that you will have problems with explorer until you change the key back.
Configuring Windows 2K for LiteStep
-----------------------------------
The most common problem that happens during a LiteStep install on a Windows NT
machine is that most of the time users don't have administrative privileges on their
machine and can't use a shell swapper. There is, however, a way to get around this.
You will need to modify a few registry entries, don't be afraid, so fire up regedit
and lets get started.
- HKey_Local_Machine\Software\Microsoft\Windows NT\CurrentVersion\IniFileMapping\
system.ini\boot > Shell
change this to USR:Software\Microsoft\Windows NT\CurrentVersion\Winlogon
- HKey_Current_User\Software\Microsoft\Windows NT\CurrentVersion\Winlogon>Shell
change the value of Shell to c:\litestep\litestep.exe
- HKey_Current_User\Software\Microsoft\Windows\CurrentVersion\Explorer
create a New value called DesktopProcess and set the Data Field to 1.
- HKey_Current_User\Software\Microsoft\Windows\CurrentVersion\Explorer\BrowseNewProcess >
change this value to "yes", it seems to correct a few problems with explorer
spawning itself as the shell.
Note: You can make LiteStep restart automatically after a crash in Window NT.
This was taken from the LiteStep b24 Manual written by TheMAN.
"The command SetAsShell makes LiteStep behave as the Official shell and it notifies
Windows of this fact. This does seem to create some problems with Windows at times
(especially with IE and quite often when running NT) and it has been found that if you
do use StepAsShell in your Step.Rc,you might have to set the
HKEY_LOCAL_USER\Software\Microsoft\Windows\Current Version\Explorer\DesktopProcess
key's value in your registry to 1 to get IE (and Windows) to work properly.
The only advantage to using SetAsShell is that LiteStep is automatically started when
it crashes, like Explorer normally does. As setting LiteStep as the shell seems to create
strange problems on different machines, it is suggested that you don't set this value in
your Step.Rc. If you do use SetAsShell and decide to take it out after a while,
remember that you will have to reboot (not Recycle as is the normal case with a
Step.Rc change) and that you may have to set the
HKEY_LOCAL_USER\Software\Microsoft\Windows\Current Version\Explorer\DesktopProcess
registry value back to 0 to get everything working properly."
So basically, if you want to try this - take a risk, worst thing that can happen is that
you will have problems with explorer until you change the key back.
Hope this helps...
